-
BCD615R
Analytic Systems: 600W, Input: 20-60V, Output: 12V, 24, 48V$Call for PriceOut of stock
Features
- Over-Temperature Protection
- Low EMI
- Output Current Limiting
- Reverse Input Protection
- Audible and Visual Indicator
- Short Circuit Protection
- Digital Volt/Ammeter
- Equalized Charging Cycle
Applications Include:
- Power Plants
- OEM Applications
- Fuel Cells
- Industrial Controls
-
ED1200
1200 Amp, SPST, Manual Disconnect Switch$549.25Features
- Rapid Manual Disconnect
- Ideal for Power Distribution Systems
- Safely Break Full Load
-
ED125
125 Amp, SPST, Manual Disconnect Switch$62.50 -
ED1800
1800 Amp, SPST, Manual Disconnect Switch$649.50Features
- Rapid Manual Disconnect
- Ideal for Power Distribution Systems
- Safely Break Full Load
-
ED250
250 Amp, SPST, Manual Disconnect Switch$129.00 -
ED252
250 Amp, DPST, Manual Disconnect Switch$123.00 -
ED402
400 Amp, DPST, Manual Disconnect Switch$347.00Features
- Rapid Manual Disconnect
- Ideal for Power Distribution Systems
- Safely Break Full Load
-
SD150
125 Amp, SPST, Manual Disconnect Switch & Main Contactor$151.00Features
- Replaced by SD200
- Consider Switching to SD200
- Combination Disconnect Switch and Main Contactor
-
L1
Input Voltage: 12V, 24V, 36V$44.00Features
- Ability to light all ten LED’s at once
- Available as Battery Fuel Gauge, or Volt Meter
- LED Flash Alert ™ for low & high charge warning
- Memory option to recall last charge level
- Keyswitch Display enable option
- Equipment lockout option
- Can display battery level during charging
-
841
Vehicle Controller Monitor with Battery Fuel Gage or BDI, 24 to 80V$99.65Features
- Directly Compatible with Curtis Controllers
- Displays Fault Codes
- Batter Discharge Indicator (BDI)
- Hour Meter and More!
-
-
906
Lower Cost Monochrome or Tri-color LED BDI, 12, 24, 36 & 48 Volts$64.75Features
- Low cost
- Large Variety of Case Styles
- Monochrome or Tri-Color LED Display
- Voltages from 12 to 48V
- Easy 2 Wire Installation
-
933/3D-Dual
Controller Only: 933/3D, Dual Voltage, Options: AV, AW$415.75Curtis Model 933/3D is a battery fuel gage and controller with lift lockout and adjustable reset and discharge settings. The 933/3D features a rugged aluminum controller for reliable operation, even in the most severe conditions. Over a half a million units installed! Learn More -
933/3D-GC
English Gage & Controller: AV, AX, JV, Dual Voltage$Call for PriceOut of stock
Curtis Model 933/3D is a battery fuel gage and controller with lift lockout and adjustable reset and discharge settings. The 933/3D features a rugged aluminum controller for reliable operation, even in the most severe conditions. Over a half a million units installed! Learn More -
933/3D-O
Controller Only: 933/3D, Options: AV, JV, AX$Call for PriceOut of stock
Curtis Model 933/3D is a battery fuel gage and controller with lift lockout and adjustable reset and discharge settings. The 933/3D features a rugged aluminum controller for reliable operation, even in the most severe conditions. Over a half a million units installed!!!!! Learn More -
3000R
enGage II 12V or 12-48VDC$Call for PriceOut of stock
Features
- Dual Function
- Programmable
- Alarm Output Signal
- Optional Hour Meter
- Accepts User Input
-
3000T
enGage III 12V or 12-48VDC with buttons and Backlighting$Call for PriceOut of stock
Features
- Monitors 3 Functions with Indicators
- Programmable
- Allows User Input
- Flexible Output Modes
-
IPS1000
1000W Pure Sine$Call for PriceOut of stock
FEATURES
Extremely rugged and well suited for marine and other demanding environments
High tolerance for shock and vibration
Ultra-quiet low EMI design
Extra heavy input filtering to eliminate interference with other equipment sharing the same batteries
'Pure Sine Wave' 120 VAC / 60 Hz fully regulated output, exactly the same as household AC
Crystal controlled for precise frequency (± 0.01 Hz)
1000 Watts of continuous output power sufficient for equipment stations
State-of-the-art MosFet technology and unique "Soft-Start" circuitry for reliable operation
Illuminated ON-OFF switch for positive indication of proper operation
Low voltage warning and shutdown circuitry to protect the batteries
Transformer type output to protect computers and other sensitive equipment from surges and spikes
Over voltage and over temperature warning and shutdown circuitry to protect the inverter
Short circuit protection with automatic recovery
LED indicators and a buzzer to bring attention to the cause of the shutdown
Thermostatically controlled fan
One or two AC receptacles for easy connection of up to four devices
Versions are available for 12, 24, 32, 48 and 72 Volt battery systems
Optional line detect feature available for operation as an 'off-line' UPS
Wide operating temperature range (-25°C to +40°C)
3 year parts and labour warranty Learn More -
IPS1500
1500W Pure Sine$Call for PriceOut of stock
FEATURES
'Pure Sine Wave' 120 VAC / 60 Hz fully regulated output, exactly the same as household AC
Ultra-quiet low EMI design
Extra heavy input filtering to eliminate interference with other equipment sharing the same batteries
Crystal-controlled for precise frequency (±0.01 Hz)
State-of-the-art MosFet technology and unique "Soft-Start" circuitry for reliable operation
Short Circuit Protection
Current Limiting
Overload Protected
Illuminated ON-OFF switch for positive indication of proper operation
Over-temperature protected
Low voltage warning and shutdown circuitry to protect the batteries
Transformer-type output to protect computers and other sensitive equipment from surges and spikes
Over voltage and over temperature warning and shutdown circuitry to protect the inverter
Thermostatically controlled fan
One or two AC receptacles for easy connection of up to four devices
Isolated input for positive or negative ground operation
Diagnostic LEDs and Audible Alarm
AVAILABLE OPTIONS
Remote Control Panel
Line Detect and AutoSwitch for operation as an 'off-line' UPS option
Ruggedization against shock and vibration
Fork Lift Modification
Conformal Coating
Extra wide Temperature Range -40°C to +40°C Learn More -
IPS600
600W Pure Sine$Call for PriceOut of stock
FEATURES
Extremely rugged and well suited for marine and other demanding environments
High tolerance for shock and vibration
Ultra-quiet low EMI design
Extra heavy input filtering to eliminate interference with other equipment sharing the same batteries
'Pure Sine Wave' 120 VAC / 60 Hz fully regulated output, exactly the same as household AC
Crystal controlled for precise frequency (± 0.01 Hz)
600 Watts of continuous output power sufficient for equipment stations
State-of-the-art MosFet technology and unique "Soft-Start" circuitry for reliable operation
Illuminated ON-OFF switch for positive indication of proper operation
Low voltage warning and shutdown circuitry to protect the batteries
Transformer type output to protect computers and other sensitive equipment from surges and spikes
Over voltage and over temperature warning and shutdown circuitry to protect the inverter
Short circuit protection with automatic recovery
LED indicators and a buzzer to bring attention to the cause of the shutdown
Thermostatically controlled fan
One or two AC receptacles for easy connection of up to four devices
Versions are available for 12, 24 or 32 Volt battery systems
Wide operating temperature range (-25°C to +40°C)
3 year parts and labour warranty
AVAILABLE OPTIONS
Remote Control Panel
Fork Lift Modification
Ruggedization against shock and vibration
Conformal Coating
Extra wide Temperature Range -40°C to +40°C Learn More
Product Categories
- Battery Chargers
- Battery Disconnects
- DC Contactors
- High Voltage Contactors
- DC/DC Converters
- Instrumentation
- Military Power Conversion
- Motor Controllers
- Proximity Sensors
- Throttles
- Shunts
- Smart Power Switching
- Motion Control
Manufacturers
- Accelerated Systems
- Albright
- Analytic Systems
- Baldor
- Curtis Instruments
- Fargo Controls
- GDI
- Navitas
- QRZ Systems
- Redler Technologies
- REMA
- Sevcon
- Soneil
- Tecknowledgey
- Thermovolt
Tecknowledgey, Inc, 8 John Walsh Boulevard, Peekskill, NY 10566, Phone: 914-739-4499, Fax: 914-739-559